Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Duct Cleaning for Northgate Homeowners
Air duct cleaning in Northgate matters because the ducts in older Northgate homes and nearby mid-century houses get overlooked for years while the furnace and heat pump get all the attention. What’s inside those ducts is the problem: dust, pet hair, drywall dust from old remodels, and the fine silt that settles in return runs and never leaves on its own. Your ducts work harder than you think, and a system serving a whole house pushes air through every one of those runs every time the heat comes on.
We’re an indoor air quality specialist, not a single-service cleaner. Our technicians have up to 9 years of experience, we use professional-grade equipment from Rotobrush and Nikro, and we offer duct repair and sealing in-house so a cleaning doesn’t get undone by leaks the next day. Call (877) 492-3448 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- One flat price per system, agreed before work starts – no per-vent pricing and no surprise add-ons once the technician is on site.
- Dual-method cleaning: Rotobrush mechanical agitation plus Nikro negative-air extraction, so debris leaves the system instead of settling back into it.
- Video inspection shows you the condition of your ducts before and after, with before-and-after photos of your own system.
- Duct repair and sealing are handled by the same team, because dirty ducts often have the leaks that recontaminate the system.
- Our technicians have up to 9 years of experience with residential and commercial systems across Northgate.
What Our Air Duct Cleaning Service Includes
Each service below is its own job with its own scope, and we’ll tell you plainly which ones your system actually needs before anything gets scheduled.
Residential Duct Cleaning
This is the core of what we do: the supply and return network in a single-family home, from the main trunk to the branch runs and the boots at each register. You need it when the house has gone years without service, when registers look gray or dusty, or when someone in the household notices more sneezing and congestion inside than out. We clean with controlled agitation and negative-air extraction, and we inspect the system first so we’re cleaning what’s actually dirty rather than working from a guess.

Commercial Duct Cleaning
Commercial work covers the duct systems in small offices, retail spaces, clinics and multi-unit buildings, where longer runs and more frequent filter changes mean a different cleaning rhythm than a house. It’s the right call when tenants report musty smells, when a space has had a remodel or a water event, or when the building has simply never had the ducts serviced. We work through the system section by section, with extraction sized to the run, and we can group the work to limit disruption to the space below.

Supply Duct Cleaning
Supply runs carry conditioned air from the furnace or air handler to the rooms, which means whatever coats those walls gets blown into the living space with every call for heat. Supply ducts are often the dirtiest part of a system because they’re the last stop before the room, and they collect fine dust that settles after the blower shuts off. We clean them individually from the register boots back to the trunk, with the register openings sealed to keep dust from escaping into the room.

Return Duct Cleaning
Return ducts pull air back to the equipment, and they’re the filter of last resort in most homes: whatever the furnace filter didn’t trap ends up coating the return trunk and the panned joist spaces used on older Northgate systems. This is where odor problems usually start, because dust sitting in a return run picks up moisture and holds household smells. We clean return runs and the spaces they pass through, which is often the step a quick blower-and-vacuum job skips.
Full System Cleaning
Full system cleaning covers supply, returns, boots, registers, and the accessible surfaces of the air handler and coil housing in one visit. This is the right choice when the system hasn’t been serviced in years, after a remodel, or after a pest or water problem in the duct path. Because we carry the full range of equipment, we can handle heavier contamination situations that a basic duct cleaner would have to turn down, and we can close any leaks we find with our duct repair and sealing service before we finish.
Video Inspection
Video inspection runs a camera through the duct path so the technician can see contamination, loose joints, separated fittings and moisture without cutting into the system blindly. It’s worth having before cleaning if you’ve been told your ducts are dirty but haven’t seen proof, or after cleaning as a way to verify that the work was actually completed. We show you the footage and the before-and-after photos of your own ducts, so the answer to “how do I know it was done” is right there on the screen.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Air Duct Cleaning
We use Rotobrush for mechanical agitation because their whip and brush heads are built to work inside a duct without damaging the liner, and we know how those heads behave through the bends in a residential branch run. Nikro equipment handles the negative-air side: the vacuum and HEPA filtration that hold the system under suction while the agitation loosens debris, which is what separates a real clean from a blow-and-go visit. Both are industry names, and we use them because they hold up under the conditions we work in.
On the air quality side, we work with Honeywell and Aprilaire equipment and know where those systems wear out, which filters and controls are worth upgrading, and how to fit them onto an existing duct layout. If your home has a Honeywell control or an Aprilaire media cabinet, we can assess the whole setup rather than just cleaning around it. We also keep Abatement Technologies equipment on hand for contamination-level situations. Our technicians have up to 9 years of experience, and whether you have Honeywell, Aprilaire or any other make, we can help.
Signs You Need Air Duct Cleaning Right Now
- Visible dust on the registers and nearby walls. If a gray film keeps coming back a week after you wipe it down, the source is usually upstream in the duct, not the room. That’s a sign the supply runs are carrying more than they should.
- A musty or stale smell when the heat or air comes on. Odor that shows up the moment the blower starts and fades when it stops points to the return path, where settled dust and moisture combine to hold smells. It’s worth looking into before the smell becomes constant.
- Uneven airflow from room to room. A room that never gets enough air usually means a restriction or a leak somewhere in the run. Cleaning plus a look at the sealing will tell you which one it is.
- Allergy symptoms that get worse indoors. If congestion, sneezing or itchy eyes ease when you’re out of the house and return when you’re home, the ducts deserve a look. Cleaning isn’t a medical fix, but a heavily loaded system can’t be helping.
- Years with no service, or a recent remodel or water event. Drywall dust from a remodel travels straight into the return system, and moisture in the duct path is a condition that wants attention sooner rather than later. A system that’s never been serviced usually has plenty to remove.
Our Air Duct Cleaning Process – Step by Step
- 1
Inspection and scope. We start by walking the system and running a video camera through the main runs and returns, so we know what’s in there and whether the ducts are intact. You get the findings before (877) 492-3448 or a quote call turns into scheduled work, and you get one flat price for the whole system.
- 2
Protect the room and seal the openings. Registers come off, openings get taped and sealed, and we set up containment so dust doesn’t find its way into the living space while we work. This step is why a professional job looks calm and stays clean.
- 3
Mechanical agitation with Rotobrush. The technician works each run with rotating brushes and air whips, loosening the coating that’s bonded to the duct walls. This is the part a simple vacuum pass can’t do – dust that’s stuck needs to be broken loose before extraction can capture it.
- 4
Negative-air extraction with Nikro. With the system under suction, loosened debris is pulled into HEPA-filtered containment and taken out of the duct rather than pushed into the rooms. See the difference negative-air extraction makes – the rooms stay clean, and the ducts end up genuinely empty.
- 5
Sealing, sanitation, and a final walkthrough. If the inspection turned up leaks or loose joints, we repair and seal them in the same visit, then finish with air quality and sanitizing where it’s appropriate. We close with photo documentation of your system, before and after, and a plain-language report of what we did.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Air Duct Cleaning Cost in Northgate?
Most residential duct cleanings in Northgate fall in a few recognizable ranges, and we’ll always give you a written estimate that sets the final price before any work begins.
| Job | Typical Estimated Range | What drives it |
|---|---|---|
| Residential supply-only or return-only cleaning | $300-$500 | Number of runs, level of dust, register access |
| Full residential system cleaning | $450-$800 | Number of registers, returns, system size, condition |
| Full system plus video inspection and photos | $550-$950 | Camera work, documentation, any repair found |
| Duct repair and sealing (added to cleaning) | $200-$600 | Length of leak, joint access, material needed |
| Commercial systems | Quoted per job | Square footage, run length, building schedule |
What affects the price most is system size and condition: a house with a dozen registers and two return trunks in a panned joist space is more work than a smaller system with a single trunk. Heavier contamination, difficult access at a finished ceiling, and any repair also move the number. The best way to avoid overpaying is to get a per-system written price instead of a per-vent price, and to make sure the quote includes supply, returns, register boots and a look at the air handler – some quotes look cheap because they only cover half the system.
Every estimate includes the inspection, a plain outline of what gets cleaned, and the flat price for your system. No coupons, no bait price that grows on site. Air quality and sanitizing are quoted separately if you want them. Call (877) 492-3448 for an exact quote – estimates are free.
Air Duct Cleaning Near Northgate – Our Service Area
We work throughout Northgate and the surrounding neighborhoods, including Lake City, Ravenna, Wedgwood, View Ridge, Maple Leaf, Bitter Lake, Green Lake, Fremont, Shoreline, Lake Forest Park and Kenmore. Scheduling is handled by phone or through our Air Duct Cleaning Northgate page, and we’ll give you a realistic window when you call. For nearby work we’re often able to fit a visit quickly, and we’ll confirm the day with you rather than guess.
If you’re in one of the neighboring areas and want a look at what we do for other homes, our air duct cleaning and air duct cleaning pages cover the same process. Duct work in the area runs the full range from original mid-century systems to newer builds, and we scope each home on its own.
Serving Northgate, WA – Our Local Coverage Area
We serve Northgate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Air Duct Cleaning in Northgate
Air duct cleaning is the process of removing dust, debris and contamination from the supply and return runs, register boots and accessible air handler surfaces in a home or building. It uses mechanical agitation to loosen what’s stuck to the duct walls and negative-air extraction to pull that material out of the system. A proper job is not a quick vacuum pass – it’s an inspection-led process with documentation. If you want a look at our full approach, our air duct cleaning overview walks through it. Call (877) 492-3448 for a free estimate.
Most residential full-system cleanings take about two to four hours, depending on the number of runs, the size of the system, and how much contamination is inside. A supply-only or return-only job is quicker. A commercial system is scheduled around the building’s use. We’ll tell you the expected time when we book, and we won’t rush the extraction step to make a slot. Call (877) 492-3448 to talk through your system.
Full residential system cleaning typically runs about $450-$800, while a supply-only or return-only clean usually comes in around $300-$500. Video inspection and duct sealing add to that, and commercial work is quoted per building. The written estimate sets the final price, and there’s no per-vent charge or surprise add-on once work starts. Call (877) 492-3448 for an exact quote – estimates are free.
Yes. We work with Honeywell and Aprilaire equipment regularly and can assess those systems as part of a cleaning, including filters, media cabinets and controls. If an upgrade would help your home’s air quality, we’ll explain the options without pushing you toward the biggest one. Whether you have Honeywell, Aprilaire or any other make, we can help. Call (877) 492-3448 to schedule.
Same-day scheduling is often possible, depending on the day’s route and your system’s size, and we’ll tell you honestly when you call. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (877) 492-3448 and we’ll get you on the schedule.
Cheap quotes are usually cheap because they cover less: one pass with a vacuum, supply runs only, no return work, no documentation, no photos of what came out. A real full-system clean takes equipment and time, and a low number tends to grow once the technician is on site and finds the returns are full. We give one flat price per system before work starts and show you before-and-after photos of your own ducts, so you’re comparing the same job. Call (877) 492-3448 for a straight answer on your system.
Clear access to the registers and to your furnace or air handler, and move breakables away from the register openings. If you have pets, put them in a room we won’t be working in, and plan for normal household noise while the blower and vacuum run. You don’t need to do any cleaning yourself beforehand – the inspection will tell us what’s there. Call (877) 492-3448 with any questions before the appointment.
Schedule Your Air Duct Cleaning Service in Northgate Today
If your registers are dusty, your airflow is uneven or the house smells stale when the heat kicks on, it’s worth finding out what’s actually in your ducts. We’ll inspect the system, give you one flat price per system in writing, and show you the before-and-after photos when we’re finished. Cleaning is only part of what we do – we also handle air duct cleaning for neighboring areas and related work like dryer vent cleaning, HVAC cleaning, duct repair and sealing, and air quality and sanitizing, all under one roof. Call (877) 492-3448 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Northgate.