Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Kenmore, WA
We provide independent Lennox service across Kenmore, WA, and the one thing that makes our Lennox work here different is moisture. Kenmore homes sit in a maritime climate where ducts stay damp instead of drying out, and that changes what we look for inside a Lennox system. We’re an independent service provider, not manufacturer-affiliated or authorized, and we repair, install and service Lennox equipment with quality parts that fit it. Call (877) 492-3448. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- We service Lennox equipment in Kenmore as an independent provider, never as an authorized dealer.
- Kenmore’s damp crawl spaces and high water table make mold and coil corrosion the real story, not dust.
- We clean evaporator coils, seal ducts and repair flex runs in one visit to the system.
- Our technicians have up to 9 years of experience, and the local pro we connect you with is licensed and insured as their state requires.
Why Kenmore Residents Choose Us for Lennox Service
We work on Lennox systems every week, so the model-specific quirks are familiar ground: the sealed-combustion air handlers, the aluminum evaporator coils, the older G-series furnaces with belt-driven blowers. Generic duct cleaners walk past those details. We don’t.
Independent service changes how we diagnose. Nobody hands us a warranty script to follow, so we tell you what your Lennox system actually needs after we’ve looked at it, not what a form says it should need. In Kenmore, that often means looking at the crawl space before we look at the ductwork, because the two are connected whether anyone planned it that way or not.
You get a clear schedule, a flat price per system agreed before work starts, and before-and-after photos of your own ducts so you can see what came out. That’s how we handle Lennox work in Kenmore, and it’s the same on every visit.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Kenmore
- Clogged condensate traps and slimy drain pans. On Lennox sealed-combustion furnaces like the G61MPV and SLP98V, the condensate trap and drain pan grow biological slime fast in Kenmore’s damp crawl spaces. Once the trap clogs, moisture backs up and finds its way into the duct system. We clear it and clean the pan so the drain path works the way it was built to.
- Formicary corrosion on aluminum evaporator coils. Lennox aluminum coils in CBX air handlers are prone to this in the Puget Sound maritime climate, and the result is a slow refrigerant leak plus reduced airflow, which in turn makes duct condensation worse. Dirty and leaking can look the same from the outside, so we test before we recommend a fix.
- Loose or glazed blower belts in older G-series furnaces. Belt-driven blowers lose airflow when the belt slips or hardens, and a starved evaporator coil ices up and drips into the supply plenum. A belt and blower check is part of the inspection, not an upsell tacked on afterward.
- Leaky flex-duct connections at the air handler and trunk takeoffs. In Kenmore’s 1950s-to-1970s ramblers and split-levels, these joints pull crawl-space humidity and rodent debris straight into the supply stream. We reconnect and seal them with mastic so the system stops drawing from the dirt.
- Musty biofilm on galvanized interior surfaces. Long damp seasons leave growth on the metal itself. Cleaning without treating the surface leaves the problem to come back, which is why we treat duct interiors for biological growth as part of the job.
Lennox Service in Kenmore: What Local Conditions Mean for Your Equipment
Kenmore’s mid-century crawl spaces stay damp year-round because the Sammamish River outflow keeps the water table high. That single fact reshapes Lennox air handler work here. A Lennox air handler mounted in a crawl space sits in standing humidity, and that humidity corrodes coil fins and breeds mold on the blower wheel. Dry-climate duct cleaners never run into this, so their process does not account for it.
Picture how this usually goes for a homeowner near the Sammamish River outflow on the first cold October day: the Lennox G61MPV furnace kicks on and a musty smell rolls out of the registers. Inspection typically turns up a clogged condensate trap, a dirty evaporator coil, and disconnected flex duct in the crawl space pulling in damp air. A qualified local pro cleans the coil and blower, reconnects and seals the flex runs with mastic, treats the duct interiors for biological growth, and then checks the crawl-space vapor barrier so the problem doesn’t simply come back next fall.
Condensation on cold galvanized runs in fall and winter is normal here too. It’s the reason we treat Kenmore duct work as moisture control first. If you want the up-link view of how we approach Lennox equipment generally, that page covers the broader picture.
Lennox Models & Products We Service in Kenmore
We service Lennox gas furnaces across the Merit, Elite and Dave Lennox Signature Collection lines, including the G61MPV, G71MPP, EL296V, EL280DFE, SL280V and SLP98V. Lennox CBX27UH and CBX32MV air handlers come through our work regularly, as do Lennox heat pumps. Evaporator coil cleaning, duct sealing and flex duct repair are the three sub-services we lean on most in Kenmore, because those are where the local failures cluster.
For parts, we use OEM Lennox parts for controls, blower motors and heat exchangers, where fit and reliability matter most. Generic items like flex duct, mastic and filter racks don’t need the OEM label, so we use quality aftermarket there and keep the cost where it belongs.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Kenmore
Prices are set per job by written estimate, and the estimate is free. We won’t quote a per-vent figure or a teaser coupon price, because that’s how this trade earns its reputation for a low number that grows once the technician is on site. One flat price per system, agreed before any work starts.
What drives the number is usually scope. A single-zone clean with a routine coil rinse sits at the low end. Add biological treatment through the duct interiors, mastic sealing of a dozen leaky flex connections, or a crawl-space vapor barrier check and the job moves up. Contamination-level situations, where Abatement Technologies negative-air equipment comes into play, are a different scale again.
Your free estimate includes an inspection of the Lennox air handler, the condensate trap, the evaporator coil and the visible duct runs in the crawl space, plus a plain-language explanation of what we found. Call (877) 492-3448 for an exact quote. We answer 24/7.
Serving Kenmore, WA – Our Local Coverage Area
We serve Kenmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Kenmore
No. Air Duct Cleaning Northgate is an independent Lennox service provider, not manufacturer-affiliated or authorized. We work on Lennox equipment as an independent shop, which means our diagnosis follows the equipment in front of us rather than a manufacturer warranty script.
Yes, where fit and reliability matter. We use OEM Lennox parts for controls, blower motors and heat exchangers. For generic items like flex duct, mastic and filter racks we use quality aftermarket parts, and we say plainly which is which in the estimate.
Most jobs run a few hours on site, and a system with heavy crawl-space contamination takes longer. The single biggest time factor here is access: crawl-space air handlers and long trunk runs under a mid-century rambler take more moving around than a basement setup. We give you a time window when we book it. Our technicians have up to 9 years of experience.
We service Lennox gas furnaces (including Merit, Elite and Signature Collection units), CBX air handlers, and Lennox heat pumps. That covers cleaning, evaporator coil service, duct sealing and flex duct repair. If you’re unsure which Lennox system you have, check the data plate and we’ll confirm before the visit.
Because the first cold October run pushes damp air out of a crawl-space system that’s been sitting at high humidity all summer. Clogged condensate traps, a dirty evaporator coil and disconnected flex duct are the usual culprits. Call (877) 492-3448 for an exact quote. Estimates are free.
Yes, and restricted airflow is one of the most common reasons. Dirty coils and leaky flex runs starve the system, so it runs longer without reaching setpoint. Sealing the leaks and cleaning the coil restores airflow rather than masking the problem.
By testing it. A dirty coil and a leaking coil can both reduce cooling, and only pressure and temperature testing tells you which one you have. We test, then tell you what we found. Guessing here costs homeowners money.
Yes. That’s exactly the housing we see most in 98028: post-war ramblers and split-levels on crawl-space foundations with original rigid galvanized trunk-and-branch runs and floor registers set in old oak or fir. We work the branches mechanically with Rotobrush and pull with Nikro negative-air extraction, then seal what we find leaking.
We give you both numbers and a straight comparison rather than pushing a new system. A cracked heat exchanger is a safety concern, so it needs attention either way. What we won’t do is talk you into a replacement your equipment doesn’t need.
Service Areas Near Kenmore
Kenmore work often takes us to nearby communities along the north end of Lake Washington. We serve homeowners and property managers in Kenmore and out toward Lake Forest Park, plus Northgate, Ravenna, Wedgwood, View Ridge and Maple Leaf. If you’re reaching us from Lake City, the crawl-space humidity story is the same.
Book Your Lennox Service in Kenmore Today
Duct trouble in a Lennox system rarely gets better on its own, and in Kenmore’s damp crawl spaces it tends to get worse. Call (877) 492-3448 and book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’ll inspect the system, explain what we found, and give you one flat price per system before any work starts.
Written by the team at Air Duct Cleaning Northgate.