Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable HVAC Cleaning Across Kenmore
If your furnace kicks on for the first cold morning of October and the house fills with a musty smell, the problem usually isn’t the filter. In Kenmore, it’s damp air moving through ductwork and an air handler that have been sitting in crawl-space humidity for decades. We’re HVAC Cleaning specialists who work on the equipment itself: evaporator coils, blowers, air handlers, and the duct runs that feed them. Our technicians have up to 9 years of experience, and we know the ramblers and split-levels along the north end of Lake Washington well enough to know where the trouble hides. Call (877) 492-3448 for a free estimate.
Why Kenmore Homeowners Call Air Duct Cleaning Northgate for HVAC Cleaning
Kenmore sits where the Sammamish River drains out of the north tip of Lake Washington, and that geography shapes the work we do here more than anything else. The ground stays wet. Crawl spaces stay damp. Cold galvanized duct runs sweat in the fall and never really dry out, which is why the calls we get from Kenmore are about mildew and musty biofilm far more often than ordinary dust.
We handle that with professional-grade equipment rather than shop vacs and wishful thinking. A dual-method process pairs Rotobrush mechanical agitation with Nikro negative-air extraction, so debris and spores leave the system instead of getting stirred into your living room. When contamination runs deeper, Abatement Technologies equipment lets us work on remediation-grade situations that basic duct cleaners turn away from. And because dirty ducts often have leaks that pull crawl-space air right back in, we offer duct repair and sealing in-house. One visit. The whole system.
We serve homeowners and property managers throughout Kenmore and the surrounding neighborhoods, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our HVAC Cleaning Services in Kenmore
HVAC cleaning in Kenmore means tending the equipment that moves air, not only the pipes it moves through. Here’s what that looks like on the systems we see most.
Evaporator Coil Cleaning
The evaporator coil is where condensation happens, and in a wet maritime climate it stays damp long enough for biological growth to take hold on the fins. We clean the coil properly rather than rinsing the surface, because a coated coil loses capacity and starts carrying that musty smell into every room. On Kenmore systems that have run for years without service, this is often the single biggest improvement to air quality.

Blower Cleaning
A blower wheel caked with debris moves less air and runs hotter. In the split-levels around Kenmore we often find the wheel weighted unevenly with lint and biological film, which shows up as weak airflow from the registers upstairs. Cleaning the blower restores the airflow the system was designed for and takes load off the motor.

Condenser Cleaning
The outdoor condenser pulls in whatever the season throws at it: cottonwood fluff, fir needles, pollen from the trees that shade so many Kenmore yards. A clogged coil makes the whole system work harder during the mild but humid cooling season. We clean the condenser so heat transfer happens the way it should.

Air Handler Cleaning
The air handler is the heart of the system, and on Kenmore’s mid-century homes it’s usually tucked in a closet or crawl-space corner where moisture collects. We clean the cabinet, the interior surfaces, and the drain pan, then check that condensate actually drains away instead of sitting. This is the service we emphasize most here, because a damp air handler undoes every other cleaning you pay for.
Coil Treatment
After cleaning, we can apply a coil treatment to help the fins resist biological regrowth in a climate that stays grey and wet nine months a year. It’s a practical step for anyone who has dealt with recurring mildew, not a substitute for source removal.
Trusted Brands We Service in Kenmore
We work with equipment from names you’ll recognize on your own system: Honeywell and Aprilaire controls and air quality components, plus the professional cleaning equipment from Nikro, Rotobrush, Abatement Technologies, and Guardsman. Familiarity with Honeywell and Aprilaire systems means we can assess whole-home air quality needs while we’re already in the air handler, and advise on filtration or humidity control that fits what’s actually installed. We don’t stock parts or carry inventory. What we bring is the right tools and the knowledge to use them on your specific setup.
See the difference
Before
After
Before
After
Before
AfterCommon HVAC Cleaning Problems We See in Kenmore Homes
Most of what goes wrong in Kenmore ductwork traces back to moisture and age. These are the patterns that come up again and again.
- Mold and mildew on galvanized interiors. Damp crawl spaces and cold duct metal make a perfect growing surface. Cleaning that treats this as a dust problem leaves the biofilm behind, and the smell returns within weeks.
- Disconnected or crushed crawl-space flex runs. Original rigid trunk-and-branch ductwork often has flex branches spliced in during retrofits. When a joint pulls apart, the system pulls humid crawl air straight into the house.
- Rodent nests and settled debris in branch runs. Older Kenmore homes have had decades of crawl-space activity. Without camera inspection and mechanical agitation, branch runs keep their debris no matter how much air you pull through the trunk.
- Damp air handlers and clogged drain pans. A pan that doesn’t drain keeps the cabinet humid year-round, which feeds growth on the blower and coil. It’s the quiet cause behind a lot of recurring musty odors.
Pricing for HVAC Cleaning in Kenmore, WA
Honest ranges for the Kenmore market, based on what the work usually takes on these homes:
| Service | Typical estimated range |
|---|---|
| Evaporator coil cleaning | $250 – $550 |
| Blower cleaning | $150 – $350 |
| Condenser cleaning | $150 – $300 |
| Air handler cleaning | $300 – $650 |
| Coil treatment | $100 – $250 |
| Duct repair and sealing (crawl-space runs) | $400 – $1,200 |
What moves the number: how accessible the air handler is, how much contamination the camera inspection finds, and how many duct runs need sealing. One flat price per system, agreed before any work starts, and you see before-and-after photos of your own equipment. The written estimate sets the final price. Estimates are free, so call (877) 492-3448.
We Also Serve Cities Near Kenmore
Kenmore shares its housing stock and its damp crawl spaces with the towns around it, so the same approach carries over. We also serve Lake Forest Park, Lake City, Northgate, and Bitter Lake, with the same equipment and the same process. If you’re just over the city line, the work is the same.
Serving Kenmore, WA – Our Local Coverage Area
We serve Kenmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HVAC Cleaning in Kenmore
Because Kenmore’s climate keeps them wet. Sitting at the north tip of Lake Washington where the Sammamish River drains out, crawl spaces and galvanized duct interiors stay damp year-round, and cold duct metal condensates in the fall and winter. That moisture supports biological growth on the metal, which is why cleaning here is framed around mold and mildew remediation and moisture control rather than dust removal. Call (877) 492-3448 for a free estimate.
The musty smell usually comes from damp contamination in the return-side trunk, the air handler, or a disconnected crawl-space run that’s pulling humid air into the system. The first cold snap is when the furnace runs long enough for you to notice it. A typical mid-century Kenmore rambler often has mildew on the return trunk and flex branches under the crawl space, sometimes with a run pulled apart at a joint and rodent debris nearby. Camera inspection finds the source. Call (877) 492-3448 for a free estimate.
Often, yes. Cleaning removes contamination, but a disconnected or leaking crawl-space run will pull humid air straight back into the system and undo the work. On these homes the sealing work is frequently the actual fix. We handle duct repair and sealing in-house, so there’s no second contractor to schedule. Call (877) 492-3448 for a free estimate.
It involves putting the system under negative pressure with HEPA filtration, then source removal with agitation tools rather than a quick blow-through. Camera inspection confirms what’s actually in the branch runs. Then the air handler, blower motor, and drain pan get cleaned, and the coil gets treated if regrowth has been a pattern. That’s what negative-air extraction is for. Call (877) 492-3448 for a free estimate.
Cleaning handles visible mold and biofilm, but testing tells you whether the problem is active contamination or has been resolved. In a maritime climate that never fully dries out, it’s a reasonable question to ask, and we’ll tell you honestly when testing makes sense and when the source removal and sealing are the more useful step. Call (877) 492-3448 for a free estimate.
Written by the team at Air Duct Cleaning Northgate.