Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Kenmore
If your ducts are leaking, crushed, or growing mildew in a crawl space, we repair and seal them in Kenmore. Our technicians have up to 9 years of experience, we use professional-grade equipment, and we agree one flat price per system before any work starts. Kenmore isn’t a generic stop for us. We know its 1950s to 1970s ramblers and split-levels, the original galvanized trunk-and-branch ductwork under their floors, and the damp crawl spaces that cause half the duct trouble we’re called about. When you call, we book a free estimate and a fast dispatch to your Kenmore address. Call (877) 492-3448. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Kenmore Homeowners Call Air Duct Cleaning Northgate for Duct Repair & Sealing
Duct repair in Kenmore is really moisture work, and that shapes how we approach every job. Kenmore sits at the north tip of Lake Washington where the Sammamish River drains out, and that wet position keeps crawl spaces and duct runs damp almost all year. Cold galvanized runs sweat through fall and winter. Seams that lose their sealant don’t just leak air, they grow mildew. Older homes here have had decades of that. Ductlining that energy upgrade framing misses the actual problem.
We offer duct repair and sealing in-house, so you don’t hire a second contractor after a cleaning is finished. We work with professional equipment from Rotobrush and Nikro, and we keep Abatement Technologies capability on hand for serious contamination and mold situations that basic cleaners turn away. Our technicians look at your whole system: the run, the joints, the insulation, and the air itself. Then we tell you what we found and what it takes to put it right.
We serve homeowners and property managers across Kenmore, and we treat the work as a process you can verify. You get before-and-after photos of your own ducts, a written estimate, and a clean explanation of which parts are being sealed, reconnected or replaced.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Kenmore
Duct Sealing
Sealing is the fix that actually stops recontamination in older Kenmore homes. When a trunk-and-branch system leaks at the joints, damp crawl-space air gets pulled into the supply side and pushed through your registers. We locate the leaks, then seal them so conditioned air goes where it’s meant to.

Mastic Sealant
We use mastic sealant on metal joints that have cracked or dried out over decades of Puget Sound humidity. Mastic holds up to the wet-dry swing that tape and caulk don’t. On 1950s to 1970s galvanized ductwork, sealing the seams is often the single most effective repair we can make.

Flex Duct Repair
Flex-duct retrofits under mid-century floors are common in Kenmore, and they’re often the source of trouble. Runs get crushed, kinked or pulled loose from the trunk, so the far registers never get real airflow. We reconnect, re-route or replace damaged flex runs and check that each register is actually delivering air.

Metal Duct Repair
Original rigid galvanized ducts in Kenmore ramblers can separate at the joints after decades of crawl-space movement and moisture. We repair the runs, rejoin sections, and address crushed segments before sealing. If a section is beyond repair, we explain the options and price them before we touch anything.
We also handle duct insulation and air leak repair as part of the same visit. Insulating cold runs stops the condensation that feeds mildew, and that step matters more here than in dry climates.
Trusted Brands We Service in Kenmore
We work with equipment from Rotobrush and Nikro for cleaning and repair, and we know Honeywell and Aprilaire systems well enough to advise on whole-home air quality when the ducts are the source of the problem. We don’t claim to carry parts or stock brands locally. What we do is assess the system you have and recommend repairs that fit it, with a clear explanation and a fast turnaround. If a component is behind the trouble, we tell you what’s needed so you can decide.
Common Duct Repair & Sealing Problems We See in Kenmore Homes
- Separated galvanized joints in 1950s to 1970s trunks. Decades of crawl-space humidity loosen sealant at the trunk-and-branch joints, so damp air leaks into the structure and rooms lose pressure. It’s one of the most common finds on original Kenmore ductwork.
- Crushed or disconnected flex-duct retrofits. When flex runs were added under older floors, they were sometimes pulled tight or flattened against framing, and far registers never get conditioned air. Reconnecting and re-routing the run usually fixes it.
- Sweating cold duct runs that feed mildew. Uninsulated metal runs condense through fall and winter, and that moisture supports mildew and biofilm on the galvanized interior. If you skip sealing and insulation, the growth comes back.
- Rodent and retrofit damage in crawl spaces. Kenmore’s crawl-space foundations give pests and old retrofits plenty of room to disturb ductwork. Duct runs get torn, shifted or blocked, and airflow suffers until the run is repaired.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Kenmore, WA
Duct sealing in Kenmore typically runs $450 to $1,200 for a single-family system, and flex duct repair usually lands between $250 and $650 depending on how many runs are affected. Metal duct repair on original galvanized trunk-and-branch systems can run $350 to $900 when joints need re-sealing and sections need reconnecting. Duct insulation on cold runs adds roughly $300 to $800. Mastic sealant work is usually included in a sealing job, and when a cleaning is part of the fix, that’s quoted separately. Costs move with the number of runs, crawl-space access, and how much damage the inspection turns up. We give a written estimate, one flat price per system, before any work starts. The estimate is free. Call (877) 492-3448. We answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Kenmore
We repair and seal ducts in Kenmore and in the towns around it. If you’re in Lake Forest Park, Lake City, Northgate or Bitter Lake, we can book a free estimate at your address too. The same damp crawl-space conditions and older ductwork show up across the north end, so the fix is often familiar. Our duct repair & sealing team covers each of these areas.
Serving Kenmore, WA – Our Local Coverage Area
We serve Kenmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Kenmore
The musty smell comes from mildew and biofilm on cold duct interiors plus damp air pulled in through leaky joints. When the furnace fires up for the first cold October morning, it pushes that stored crawl-space air through your floor registers and into the rooms. Kenmore’s position at the north tip of Lake Washington keeps those crawl spaces damp nearly year-round, so the growth doesn’t dry out. Sealing the joints and insulating the cold runs is what stops it from coming back. Call (877) 492-3448 for a free estimate.
Sealing is usually worth it first. Original galvanized trunk-and-branch systems in Kenmore can often be repaired and sealed rather than torn out, especially when the duct body is sound and the problems are at the joints. Replacement only makes sense when sections are crushed or badly deteriorated. We inspect, show you what we found, and price both paths so you can decide. Call (877) 492-3448 for a free estimate.
Yes. Most sealing and repair work happens from the crawl space and the registers, not by removing floors. We work from below to reach the joints, reconnect flex runs and apply mastic sealant. There are cases where a difficult run is blocked, and we explain that before any work begins. Call (877) 492-3448 for a free estimate.
In this climate the duct problem is moisture, not just dust. Dry regions fight dust accumulation, while damp crawl spaces here cause condensation on cold galvanized runs, mildew on duct interiors, and sealant that fails faster. That’s why we pair sealing with insulation on cold runs in Kenmore. Skipping that step lets the growth return. Call (877) 492-3448 for a free estimate.
Usually yes, or the repair won’t hold. If mildew or debris is left in the system, sealing the leaks traps contamination and the run stays dirty. In Kenmore’s damp homes we typically clean under negative pressure with HEPA filtration, then reconnect and seal. That’s the order that keeps the problem from coming straight back. Call (877) 492-3448 for a free estimate.
Book Your Duct Repair & Sealing in Kenmore
Damp crawl spaces and aging ductwork in Kenmore can be repaired. We inspect the system, show you what we found with photos, and give you one flat price per system before work starts. Our technicians have up to 9 years of experience, and we use professional-grade Rotobrush and Nikro equipment. If your ducts smell musty or your registers aren’t delivering air, call (877) 492-3448 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Northgate.