Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Broadview
If your Broadview home has rooms that never quite warm up, or you can hear the furnace pushing air somewhere other than the registers, the problem is usually in the ducts themselves, not the equipment. We repair and seal ductwork across Broadview, from the crawl-space ramblers near Carkeek Park to the split-levels off Greenwood Avenue North. Our technicians have up to 9 years of experience, and they work with professional-grade tools, not a roll of tape and good intentions. Ducts in Broadview take a beating from damp winters and decades of use, and a sealed system is what keeps your heat where it belongs. Call (877) 492-3448 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Broadview Homeowners Call Air Duct Cleaning Northgate for Duct Repair & Sealing
Most of what we see in Broadview is original galvanized ductwork from the 1940s through the 1970s, and that shapes how we approach every job. This is a repair-and-reseal neighborhood, not a new-construction cleanup one. Homeowners call us because we treat the whole system: we inspect, agitate and extract debris under negative pressure with Rotobrush and Nikro equipment, then seal the joints and verify airflow at the registers. Sealing without cleaning first just traps debris in place.
Broadview sits on Seattle’s northwest edge, where the marine climate keeps indoor humidity high through wet winters, and where fir and cedar pollen blows in from the greenbelt and the Carkeek Park corridor. Ducts here collect heavier loads than the age of the house would suggest, and crawl-space runs often hold rodent nesting material. That’s the pattern we plan for. We offer duct repair and sealing in-house, so you don’t hire a second contractor after cleaning is done. One visit covers the whole system.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Broadview
Duct Sealing
Duct sealing closes the gaps that send conditioned air into your crawl space instead of your living room. In Broadview’s postwar ramblers, the worst leaks are usually at the seams and taped joints of the original sheet-metal runs, where decades-old tape has dried and let go. We seal those joints properly so the blower’s air reaches the registers.

Mastic Sealant
Mastic is the durable sealant we use on metal duct joints, and it holds up far better than fabric tape in a damp crawl space. Broadview’s wet winters are hard on tape and cheap sealants, which crack and peel within a few seasons. Mastic forms a lasting bond at the seams and collars.

Metal Duct Repair
Original galvanized ducts in Broadview homes sometimes separate entirely at a joint, or a run gets crushed or bent out of shape. We straighten, reconnect and reseal metal runs so the trunk line and branches hold pressure again. It’s repair work, not a patch and hope situation.

Flex Duct Repair
Some Broadview split-levels have flex duct sections added during past renovations, and those are prone to sagging, tearing, or pest damage at the collar. A leaking flex collar bleeds air the same way a bad metal joint does. We repair or replace the damaged section and seal the connection.
Duct Insulation and Air Leak Repair
Unconditioned crawl spaces and shallow attics in Broadview homes leave duct runs exposed to cold, damp air. Insulating those runs and repairing the leaks around them keeps the heat in the duct where it belongs. It’s a small addition to a repair job with a real effect on comfort.
Trusted Brands We Service in Broadview
We work with equipment and components from names that HVAC professionals rely on. Abatement Technologies gear lets us handle serious contamination cases, including mold and heavy particulate in crawl-space and attic runs, that basic cleaners turn away. Honeywell and Aprilaire controls and air quality components are familiar territory, so we can assess your system and advise on whole-home upgrades if the ducts are sound but the setup isn’t. We don’t stock parts or keep a warehouse; we diagnose on site and source what a specific job needs. The goal is a proper repair the first time, not a callback.
Common Duct Repair & Sealing Problems We See in Broadview Homes
- Separated galvanized joints in crawl-space runs. Decades-old sheet-metal ducts pull apart at the seams and leak into the unconditioned crawl space, so the blower pushes heat out of the living area. This is the single most common issue in Broadview’s ramblers.
- Dried-out taped joints. The fabric tape used during old installations has lost its grip, and the joints it was meant to seal are now open. It’s a repair-and-reseal job, not a tape-over.
- Rodent debris and pollen in shallow-attic runs. Broadview’s greenbelt and Carkeek Park corridor send fir and cedar pollen into attic intakes, and crawl-space runs collect rodent nesting material. Sealing alone won’t fix the airflow problem those cause; the debris has to come out first.
- Damaged flex duct in converted and renovated spaces. Postwar split-levels with added flex sections often have chewed or sagging duct at the collar, which leaks just like a bad metal joint and needs repair, not just sealant.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Broadview, WA
Pricing on duct repair and sealing is quoted per job, based on a written estimate after we inspect the system. As a rough guide for the Broadview market, a typical duct sealing job runs $450 to $1,200. Metal duct repair at a separated joint usually runs $150 to $400 per affected run, mastic resealing of a trunk line runs $300 to $800, and flex duct repair or replacement runs $120 to $350 per section. Insulating exposed crawl-space or attic runs adds $200 to $600. The final price is set by the written estimate, and the estimate is free. We don’t quote per-vent teaser prices.
We Also Serve Cities Near Broadview
Broadview is part of a wider service area, and we work the same duct repair and sealing jobs for neighbors throughout the region. We also serve Broadview, Shoreline, Bitter Lake, Lake Forest Park, and Lake City, and our Duct Repair & Sealing team handles crawl-space, attic and flex duct runs in all of them. If you’re just over the line from Broadview, call and we’ll confirm coverage.
Serving Broadview, WA – Our Local Coverage Area
We serve Broadview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Broadview
Most original galvanized ducts in Broadview can be sealed and repaired rather than replaced. The metal itself is usually still solid; the problem is the joints and seams that have opened and the tape that has failed. We inspect the runs, clean the debris out, reseal the joints with mastic, and repair any run that’s crushed or separated. Only badly deteriorated sections get replaced. Call (877) 492-3448 for a free estimate.
Uneven heating after a cleaning almost always points to leaks, not dirt. In a typical Broadview crawl-space rambler, the supply and return ducts have separated at the seams, and the blower loses conditioned air into the crawl space before it reaches the far rooms. Cleaning restores airflow but doesn’t close those leaks. The fix is a camera inspection, then resealing the joints and verifying airflow at each register.
Yes, the wet marine climate and long shoulder season with windows shut can drive humidity high enough to support mold and mildew growth inside ductwork. Crawl-space runs are especially vulnerable because they sit in unconditioned, damp air. Abatement Technologies equipment lets us handle contamination-level cases that basic cleaners won’t touch. Call (877) 492-3448 for an inspection.
Rodents get into crawl-space and shallow-attic duct runs through gaps and open connections, and the surrounding greenbelt gives them easy cover. In Broadview, technicians routinely find nesting material in the original runs. That debris blocks airflow and seals off pressure problems, so it has to be removed before any sealing happens. We agitate and extract under negative pressure to clear it.
You can look for the signs: uneven room temperatures, higher heating bills, whistling or rattling at the registers, or visible dust in a crawl space. But the only reliable way to know is a camera inspection. We check the runs, look at the joints and collars, and give you a written estimate before any work starts. Call (877) 492-3448 for a free estimate.
Get a Free Duct Repair & Sealing Estimate in Broadview
If your Broadview home’s heating feels uneven or you suspect the original ductwork is leaking, it’s worth a proper inspection. We’ll check the runs, explain what we find, and give you a written estimate with the price set per job before any work begins. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (877) 492-3448 today.
Written by the team at Air Duct Cleaning Northgate.